To avoid a situation where you have to undo the entire floor, make sure that the size of the planks is equal and even before installing the floor. When installing vinyl flooring , you want to ensure that the planks are laid down in a straight line. To help with this, you will need to mark the floor with straight chalk lines to serve as guides.
Mark a vertical line of each central point and then connect these points to the middle. In the end, you would have divided the room into four quarters. Next, account for the expansion gaps.
This small gap allows space for the planks to safely expand and contract due to temperature changes. There is a risk of the floor buckling if there is no expansion space between the walls. Keep an eye on this line when you start installing the planks. The way you lay down the first row will determine how the rest of the rows and the entire floor will turn out.
A rule of thumb is to ensure that the last plank of the first row is at least 6 inches long. If not, you will need to cut the first plank to make space for the 6-inch plank at the furthest end. Vinyl planks come with a tongue on one side and a groove on the opposite side. The tongue and groove design allows the planks to interlock in place.
To get started with installation, you will first cut the tongue of the first-row planks. This is the only time you will need to cut the edges of the plank. The only other time will be if you need to match the size of the last row planks with that of the first row planks.
After trimming the edge of the first row planks, it is now time for installation. The edge with the tongue cut off should face the wall while the grooved side faces the room. If you decide your old vinyl floor is not in good enough condition to lay the new floor directly over the old surface, the best solution short of removing it is to use underlayment. The key to successfully laying new vinyl over old is ensuring the surface is in suitable condition.
Save my name, email, and website in this browser for the next time I comment. Table of Contents Should you lay a new vinyl floor over an old one? Both work, but the floating floor installation is more common because it makes installation easier. Floating floor installation is the most common type of installation. Start installing vinyl plank directly onto the concrete without any adhesive underneath them.
Two inches away from every exterior wall run another strip of OSB board and secure with construction screws about two inches apart along its length make sure not to leave exposed metal. It also fits over most surfaces, including concrete.
Although the flooring comes in a variety of forms, planks are installable with a minimal amount of tools and measuring. The hardest part of the job is often cleaning and leveling the concrete base.
After the concrete base is ready, lock the vinyl planks together to install your new floor. Vinyl planks are a great option if you want durable flooring but don't have a ton of installation experience. Then, use a level to find any spots where the ground is uneven and apply concrete self-leveling compound to even it out. Once you get to the end of the room, use a utility knife to cut the planks to fit. To learn how to replace the baseboards once the planks are installed, read on!
Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need. Related Articles.
Article Summary. Part 1. Remove the baseboards if your walls have them. Use a sharp utility knife to cut through any paint holding the baseboards to the walls.
Then, slide a putty knife behind the boards, prying them lightly to loosen them. Locate the nails holding the baseboards in place, then use a pry bar to pull them out of the wall. Work in sections, loosening the boards until you are able to remove them safely. Chisel any cracks in the floor to clean them. Hold the chisel at an angle with the tip in the crack.
Pound the back end of the chisel with a hammer to loosen any debris inside the crack. Hairline cracks need to be opened up a little to let in new filler material. Be very gentle when using the chisel to avoid making the crack worse. Clean the floor with a brush and vacuum. Pick up all debris off the floor before attempting to wash it.
Then, sweep up dust and other debris with a whisk broom. Finish removing leftover debris with a good vacuum cleaner.
0コメント